Tape applicators

Apply tear strip, transfer tape and double-sided tape automatically, in line with folder-gluers, converting lines and conveyors.

Who it is for

  • Converters and folding carton plants
  • Corrugated and display manufacturers
  • Direct mail producers adding peel-and-seal closures
  • Product assembly lines

What it fixes

  • Applying tape by hand
  • Inconsistent tape placement
  • No way to add tear strip or transfer tape in line

What we will ask you

Have these answers ready and the first conversation gets you a configuration and a quote, not a brochure.

  1. What tape, how wide, and how many lanes?
  2. Line speed in feet per minute?
  3. What machine does it mount on: folder-gluer, conveyor, other?
  4. Product width?

How to choose

  • Tape type: tear strip, transfer, double-sided and pull-tab tapes each need the right applicator head.
  • Lanes and width: how many tapes go on at once and how wide each one is.
  • Mounting: heads mount to your folder-gluer, conveyor or taping system; the mounting is engineered for your machine.
  • Uptime: splicers and tape-low sensors keep the line running through roll changes.

Machines for this job

From Straub and Garrido. Sold new; our own technicians install and service the Straub machines.

Compare the specifications

Manufacturers' published figures. Tell us your pieces and we confirm the fit.

ModelSpeedLargest pieceThickness
Garrido CS-TD Automatic Carton Sealer MachineMax. Speed 62 ft/minup to 18.875 inup to 18.875 in
Straub CF-18 & CF-30HD Continuous FeedersAdjustable to 400 ft. (122 m) per minute (will not run that fast with T-646 Taping System)18 x 20 inup to 0.04 in
Straub SD-4 Conveyor System0-100 ft per minuteAsk usAsk us
Straub SD-6 Conveyor System, 6 in x 6 ft continuous belt0-100 ft per minuteAsk usAsk us
Straub SD-40 / SF-40 Feeding and Conveying SystemUp to 350 ft (107 m) per minute40 x 35 inAsk us
Straub SD-60 Corrugated Conveying SystemUp to 500 feet per minute (152.4 m per minute)60 x 78 inAsk us
Straub SD-625 Pad ApplicatorUp to 75 per minuteAsk usAsk us
Straub SD-650 Label Applicator Kitup to 200 fpmAsk usAsk us
Straub SD-658 Tape ApplicatorVariable up to 40 ft per minute depending on the productAsk usAsk us
Straub SD-660 Automatic Tape Splicing SystemUp to 700 fpm (213 mpm)up to 2 inAsk us
Straub T-626 Flat Surface Tape Applicator (RH)350 feet per minuteAsk usAsk us
Straub T-626-HD Tape ApplicatorUp to 500 fpmAsk usAsk us
Straub T-626U Flat Surface Tape ApplicatorUp to 750 fpmAsk usAsk us
Straub T-627 Flat Surface Tape Applicator250 ft per minuteAsk usAsk us
Straub WL-50 Liner Pull-Tab Applicator2 seconds per cycle, plus load/unload timeup to 1.75 inAsk us

Common questions

Will it fit our folder-gluer?

Tape heads mount to the machine you already run. The mounting is engineered for your machine, and our technicians install it.

Can it splice rolls without stopping?

Automatic splicers and tape-low sensors keep the line running through roll changes.

Often paired with

Supplies it runs on

Tell us about the job

Answer what you can from the questions above, or just describe the work. A person reads every request and gets back to you. Prices are by quote, because every machine is configured to the pieces it runs.

On-site installation, training and service for the Straub machines in New York, New Jersey, Connecticut, Pennsylvania and Delaware. Equipment and supplies ship nationwide and into Canada.

Who we serve: Commercial and in-plant printers, Fulfillment, e-commerce and 3PL.