Shrink packaging explained: L-bar sealers, side sealers, bundlers and tunnels
Shrink packaging seals a product inside plastic film and then heats the film so it pulls tight around it. Every line has two halves: a sealer that encloses the product in film, and a tunnel that shrinks it. Which sealer fits comes down to three things: the size of the product, how many you need per minute, and how often the product changes.
In short
- L-bar sealer: mixed products, short and medium runs, frequent changeovers.
- Side sealer: long products, or steady, high-volume runs of one product.
- Bundler: groups of products held together in a sleeve, open at the ends.
- Tunnel: shrinks the film evenly; size it to keep up with the sealer.
L-bar sealers
Center-folded film runs over and under the product, and an L-shaped sealing bar comes down to seal the open side and the trailing end in one stroke, leaving the product in a sealed bag ready for the tunnel.
- Fits: mixed products and frequent changeovers: boxes, books, kits, printed packs, short and medium runs.
- Range: manual tabletop units up to fully automatic machines feeding a tunnel.
- Limit: the product has to fit inside the bar. Long products need a larger machine or a side sealer.
Side sealers
The film forms a continuous tube around a line of products, sealed along the side as they move, and a cross seal cuts between each piece.
- Fits: long products, and steady high volume of the same product, often fed by conveyor from another machine.
- Advantage: no length limit from a bar, and smoother continuous motion at higher speeds.
Bundlers (sleeve wrappers)
A bundler wraps a sleeve of film around a group of products, leaving the ends open, and the tunnel shrinks it tight. The open ends form the “bullseyes” you see on cases of bottles and cans.
- Fits: multipacks, beverage and canned goods, stacks of printed products, trays.
- Film: usually polyethylene, heavier than retail shrink film.
Tunnels
The tunnel heats the sealed package so the film shrinks evenly. Temperature, conveyor speed and airflow are set together for the film and the product. A tunnel that is too small for the sealer’s output becomes the bottleneck of the line, so size them as a pair.
Film
| Film | Use it for | Good to know |
|---|---|---|
| Polyolefin | Most retail, printed and food products | Clear and strong; the general-purpose choice |
| PVC | Low-cost, glossy wraps | Brittle in the cold; sealing it gives off fumes, so it needs ventilation |
| Polyethylene | Bundles, multipacks, heavy items | Heavier; standard on bundlers |
Film is ordered by type, thickness and roll width, and the width is set by the machine and the product. Give us the machine model and the product size and we match the film; see shrink and stretch film.
Choosing a line
Bring three numbers: the product’s largest length, width and height; the packages per minute you need; and how often the product changes. Those decide between an L-bar sealer, a side sealer and a bundler, and size the tunnel. We sell and service Garrido shrink, bundling and case packing equipment, and we keep it running after it is installed; see Garrido and packaging equipment.
Questions we get
What is the difference between an L-bar sealer and a side sealer?
An L-bar sealer seals the bag with an L-shaped bar, so product length is limited by the bar size. A side sealer seals continuously along the side and cuts between pieces, so it handles long products and steadier, higher volumes.
Which shrink film should I use?
Polyolefin for most retail, printed and food products: clear, strong and without the fumes of PVC. PVC is inexpensive and glossy but brittle in the cold and needs ventilation when sealed. Polyethylene is for heavy bundles and multipacks.
Do I need a shrink tunnel?
For a tight, consistent finish at production speed, yes. A heat gun works for a handful of packages; a tunnel shrinks every package the same way and keeps pace with the sealer.
What do I need to know to choose a shrink machine?
The product's largest length, width and height, how many packages per minute you need, and how often the product changes.