Case sealers and cartoning explained: random vs uniform, tape vs glue
The end of a packaging line does three jobs: form the case, fill it, and seal it. Each step can be done by hand, semi-automatically or automatically, and the right first purchase is almost always the step that costs the most labor today.
In short
- Uniform case sealer: one case size at a time; simplest and least expensive.
- Random case sealer: adjusts to every case automatically; built for mixed-size fulfillment.
- Case erector: forms the case and seals the bottom; often the first machine that pays.
- Cartoner: forms, loads and closes folding cartons for retail and kitted products.
Which machine for which job
| Your situation | Usually the right machine |
|---|---|
| Long runs of one case size | Uniform case sealer |
| Every order ships in a different box | Random case sealer |
| Staff folding and taping case bottoms all day | Case erector |
| Product goes into retail folding cartons | Cartoner |
| High volume, food or retail shipping cases | Sealer with hot melt instead of tape |
Case sealers
A case sealer folds the top flaps and seals the top, and usually the bottom too, as the filled case passes through on drive belts.
- Uniform sealers are set to one case size with a few adjustments. They are simple, reliable and the least expensive way to automate sealing when you run long batches of one size.
- Random sealers sense the height and width of each case and adjust automatically. They suit fulfillment and 3PL work, where the next box is rarely the same as the last.
Case erectors
A case erector takes flat blanks from a magazine, opens them, folds the bottom flaps and seals the bottom. The case leaves ready to fill. Because case bottoms are slow, repetitive work, this is frequently the machine that frees up the most people.
Tape or hot melt
| Tape | Hot melt glue | |
|---|---|---|
| Start-up | Immediate | Needs to come up to temperature |
| Cost per case | Higher at volume | Lower at volume |
| Maintenance | Tape heads and blades | Glue tank, hoses and nozzles |
| Typical use | Most lines, mixed work | High volume, food and retail cases |
Pressure-sensitive tape is the default. Water-activated tape gives a stronger, tamper-evident seal. For hot melt systems, see hot melt glue; the care that keeps a mailing glue system running applies to case sealing too.
Cartoners
A cartoner forms a folding carton, loads the product and closes the carton, with glue or tuck flaps.
- Horizontal cartoners push the product in from the side. They suit most packaged goods, kits and printed products.
- Vertical cartoners drop the product in from above, for loose or bulk items.
- Intermittent motion machines index carton by carton and handle frequent changeovers; continuous motion machines run faster for long runs.
Before you choose
Bring us the case or carton sizes you run, the cases per minute you need, how often the size changes, and how cases reach the machine today. Those four answers decide uniform or random, tape or glue, and whether an erector or cartoner earns its place. We sell and service Econocorp cartoners and carton sealers and Garrido case packing and sealing equipment, and we supply the tape, glue and strapping those lines run on; see packaging equipment.
Questions we get
What is the difference between a uniform and a random case sealer?
A uniform case sealer is set to one case size and runs it until someone changes it. A random case sealer measures each case as it arrives and adjusts itself, so mixed sizes run back to back.
Should I seal cases with tape or hot melt glue?
Tape needs no warm-up and suits most lines. Hot melt is common at high volume and in food and retail shipping cases, and costs less per case, but the glue system needs heat and routine maintenance.
Do I need a case erector?
If people spend hours a day folding and taping case bottoms, a case erector usually pays for itself first. It forms the case and seals the bottom so it arrives ready to pack.
What is a cartoner?
A machine that forms a folding carton, loads the product and closes the carton. Horizontal cartoners load from the side; vertical cartoners load from above.