Choosing a tabber: the questions that decide the machine

By the Tri-State Equipment parts desk. Updated November 16, 2026.

USPS requires folded self-mailers, booklets and double postcards mailed at automation prices to be sealed, and a tabber is how most shops do it. The right tabber is decided by the work you run, not by a spec sheet. These are the questions we ask before recommending a machine, in the order that matters.

In short

  • Start with your pieces: sizes, thickness, stock and where the fold sits.
  • Then the tabs: sizes you need, how many per piece, and on which edges.
  • Then volume and speed, and what feeds and follows the tabber.
  • Then new or refurbished, and who will service it.

1. What pieces will you tab?

  • Sizes and thickness, from postcards to booklets. Bring your smallest and largest real pieces.
  • Where the folded edge sits. It decides where tabs go and how many USPS requires.
  • Stock. Heavy and coated stock changes both the tab count and how the piece feeds.

2. Which tabs, and how many?

Question Why it matters
1 inch, 1-1/2 inch, or both? Booklets require 1-1/2 inch tabs; switching sizes may need changeover parts
How many tabs per piece? Two or three is common; more can mean a slower setup or a different head arrangement
Tabs on one edge or more? Tabs on more than one edge, or several per edge, can call for more than one tab head or web
Clear, translucent or paper? Paper faces are needed where a tab could sit in the barcode clear zone

The USPS patterns for each kind of piece are in Wafer seals and tabs.

3. How much, and how fast?

Monthly volume and your biggest deadline jobs decide how much speed is worth paying for. A tabber that runs a few hours a week has different needs from one that tabs all day through election season.

4. What feeds it, and what comes after?

A tabber sits on a line: a friction feeder in front, a transport base under it, and often an inkjet base addressing the same pieces in the same pass. The feeder matters as much as the tabber, because placement is only as good as the piece arriving square and on time. If you have a line today, list what is on it so the new machine fits.

5. New or refurbished?

New Refurbished
Kirk-Rudy models 540 and 545D series Legacy models such as the 535 series
Price Higher Lower
Best for Main production lines, high volume Lower volume, a second line, a backup
Support Full manufacturer support Refurbished in house by our technicians, supported with parts and service

6. Who keeps it running?

Ask any dealer this before you buy. Our technicians average 30+ years on this equipment, we respond within one business day, on-site service covers NY, NJ, CT, PA and DE, and we stock the tabs and wear parts these machines use.

Bring this to the conversation

Your smallest and largest pieces, the tab pattern each needs, monthly volume, and what is on your line today. With that we can recommend a configuration and quote it; request a quote.

Questions we get

Which Kirk-Rudy tabbers are sold new today?

The 540 and 545D series. The 535 is a legacy model; many are still in service, and we support them with parts and in-house refurbished units.

Do I need a feeder with my tabber?

For production work, yes. The feeder singulates the pieces at speed, and a feeder that pulls doubles or feeds crooked ruins tab placement no matter how good the tabber is.

Can a tabber run in line with an inkjet base?

Yes, and many shops run it that way so pieces are addressed and tabbed in one pass. Tell us what is on your line today so the new tabber fits it.

Should I buy new or refurbished?

New gives you the current model and full manufacturer support. A unit refurbished in house by our technicians costs less and suits lower volumes or a second line. We will tell you plainly which fits your work.